Are you looking for flags such as national or international flags, advertising flags, club– or city flags? You can get all flags in different sizes and formats from us. All of our flags are, out of principle, sewn with a double safety seam. Below you get an overview of the different kinds of flags!

The most common materials used in the production of flags are gloss polyester (high-quality knitted polyester with 110 gr./m ²) and the so called Spunpolyester (high-quality polyester tissue with 155 gr./m ²). Especially for decorating(indoors) there are naturally a quantity of further materials (even such that can be printed on both sides with an opaque layer), glossy finished, high gloss etc. - with over 50 different variants - a large selection is available. You can find more under our material overview.

		Flags to hoist in landscape format The short side lies on the flag pole, the long side waves freely. We offer a standard stable belt with cord and cord loop on the mast side – alternatively the belt with two or several noncorrosive plastic carabiners, furthermore a variantion with metal eyes or a hollow seam for the insertion of a bar. Every other possible variation according to your wishes can be produced!
		Flags to hoist in portrait format The long side lies on the flag pole, the short side waves freely. We offer as standard a stable belt with a noncorrosive plastic carabiner per meter flag height (e.g. 120 x 300 cm 4 carbines have) on the mast side. The carabiners could be, for example, replaced by metal eyes – every other variation accoriding to the customer's request is possible.
		Portrait format flag for Arm The flags for bracket poles are worked exactly the same as the hoist flags described in portrait format. The crucial difference is a hollow seam on the upper edge for the admission of the arm of a bracket pole. On the upper edge it is also possible to insert a desired number of carabiners for hooking into the arm. Every other variation is possible!
		Hanging flag/swiveling flag In principle these flags are manufactured exactly like landscape format flags - with the difference that on the pole side a hollow seam is attached e.g. for the admission of a swiveling bar. For masts attached in a 90°-angel on a buidling front, in is possible to make a version with carabiners, cord and cord loop or in any other variation possible.
		Banner Banners are from the form portrait format flags – however with the hanging possibility not on the long side but on the upper edge. A hollow seam belt on the upper edge (on indoor decoration banners out of flag material) is used to hold the banner hanging mechanism (usually a wooden transverse bar with white or different color balls and a hanging cord with a carbiner). Thus one can also always completely see a banner, even with zero wind. So that a banner does not strike wildly around with strong wind , one can centrically insert a ring safety device, which exhibits a row of metal rings to the rear of the pole, which can be secured to the flag pole by means of a mooring rope.
		Band For meetings, greetings at city entrances or as an advertising measure at fairs and exhibitions one uses horizontal bands. A band is manufactured e.g. with metal D rings in the corners – and/or also with metal eyes every 50 cm on the upper and lower edges for the admission of a bracing cable. Also one can sew in a rope in the upper and lower edges that can be used to hang the Banner.
		Long Pennants These kind of flags comes from the Scandinavian area. In Denmark or Sweden such a pennant can be found blowing almost in front of every house. Here as well, is this article becoming more popular. We can produce any size – and fulfill almost any customer's request. On the mast side there are the same possibilities as a hoisting landscape format flag. When desired we can also attach a crossbar on the mast side!
		Wind socks You see this special kind of flag mostly in ports and on bridges. Of course we can also manufacture wind socks in your preferred size.